Mast climbing work platforms:

Scanclimber Mastclimbing Work Platform

SCANCLIMBER Mast Climbing Work Platform is the perfect solution for work on facades of high buildings.

AT LEAST 30% INCREASE IN PRODUCTIVITY

SCANCLIMBER Mast Climbing Work Platform is the perfect solution for renovation, installation and bricklaying work on facades of high buildings.

HOIST AND PLATFORM IN ONE

SAFE AND ERGONOMIC

• Always working at the optimal height with material and tools within easy reach
  
• No need for workers to climb up and down 4-5 times per day
  
• Better condition and motivation of personnel – less accidents, better efficiency
  
• Sometimes 2 workers can do the work in the same time or faster than 3-4 with other methods
• time and cost saving
  
• Weather protection and heating can be provided -> no breaks due to weather conditions and possibility to use all year round
  
• Electric outlets at platforms for power tools
• no need for trailing cables or expensive  Distribution points
  

Platform is a “Mobile Workshop”
TIME AND COST SAVING

• Materials and other necessary equipment can be lifted on high payload platform at the same time as the workers
  
• Projects will be done faster and with reduced labour and plant costs
  
• Quick and easy erection and dismantling
  
• Easy handling of material – no need for horizontal hoisting/moving
  
• Solid construction, cheap to maintain and easy service
  
• Only few wall anchors needed and free standing up to 20m
  
• The long platform speeds up work on wide facades
  
• When using SCANCLIMBER the value of damaged glazing or cladding elements will be reduced
  
• Unauthorized access to buildings is eliminated when using SCANCLIMBER = more security
  
• Especially at renovation project the use of platforms is more friendly for inhabitants in the buildings
  
• No obstruction at work area
  
• Easy storage and transportation

TECHNICAL ADVANTAGES

• High free standing - height up to 20m
  
• Max height up to 100m and even more with extra arrangements
  
• High payloads, single masted up to 2700kg and twin masted up to 5000kg
  
• Modular system, interchangeable mast sections, wheel chassis, mini- chassis, railings, wall anchoring, etc. - Low total investment (space saving at storage)
  
• Mast sections, anchors and railings hot dip galvanised
  
• Mast section weight only app. 82kg
  
• Mast section outer dimension 700 x 700mm giving good standing stability Platform width: 1600mm
• more place for workers and material
  
• Platform lengths from 4,1m (single masted) to 40m (twin masted)
  
• Telescopic platform extensions
  
• Railing and door modules with built-in kick plates
  
• Optional self-propelled wheel chassis
  
• Solid safety gripping device
  
• Platform modules can be manually mounted and therefore also easily transported
  
• The platform can be driven down close to the ground, which enables easy loading and unloading  of the working material
  
• The platform floor is made of corrugated aluminum plate, not of wood
  
• Due to high quality steel the total weight of the unit is smaller, which lessens the pressure  towards the ground under the outriggers
  
• All components are of high quality, such as German SEW Eurodrive or Flender lifting mechanisms, Schmersal and Telemecanique electric equipment
  
• SCANCLIMBER has good references all over the world with export also outside Europe even to Japan, Far- East and the USA.

Models:

Scanclimber Construction Hoist :

For use at construction sites for vertical transportation of material and people

Material hoists/transport platforms: